How to Install a 2 Post Car Lift


If you are considering installing a car lift, it is wise to seek Mechanic Superstore's help. Not only can a professional install the lift correctly, but they also know how to troubleshoot any problems it may encounter. And, of course, they will be able to help you avoid damaging your vehicle!

3,000 PSI of reinforced concrete is required for auto lifts

To support the weight of an auto lift, a reinforced concrete floor must have a minimum PSI of 3,000. It should be at least four inches thick and have no more than a three-degree slope. In addition, the slab must be surrounded by an existing floor. The concrete supplier should provide certified strength documentation.

Before purchasing an auto lift, check with the manufacturer about mounting requirements and footing requirements. The majority of lifts require four inches of reinforced concrete with a 3,000 PSI compression rating. Some models require bolt-down mounting, while others are free-standing. Most models come with 110 or 220 volt power options. 220 volt power is more efficient and speeds up the lifting process.

For installation of a two-post car lift, a solid foundation is necessary. The concrete slab should be at least 4.25" thick and must be three feet in depth. The concrete must also be cured for 28 days before installation.


Before installing a 2 Post car lift, you need to prepare the lifting area. This will include making sure the floor is level and that there are no obstructions in the area. You should also measure the center of gravity of the vehicle and make sure it fits within the lifting point. Next, you need to check that the lift is safe and secure by ensuring that all warning labels and other safety materials are visible and easy to find.

To do this, start by stripping the lifting column of its packaging and plastic. Also, remove any chains or cables attached to the column base. Then, use a piece of chalk or crayon to make an outline of the column.


A two-post car lift is an essential piece of workshop equipment. But before you purchase one, you need to know your budget for it. The cost of such a lift is usually more than you might think, so it's important to make sure you can afford it. You should also know what type of use you plan to get it for. If you plan to do regular maintenance and servicing of your car, then a 2-post lift will be perfect for you. But if you want to use it for storage purposes, then a 4-post lift will be more appropriate.

When installing a 2 Post Car Lift, it's important to check all of its components to make sure they are in alignment and square. It's also important to check the hydraulic systems and safety locks. Then, you should test the lift's basic range of motion. After that, you can hook up the balancing cables and make sure the carriages remain level.


When installing a 2-post car lift, the safety of the lift is a crucial concern. It is important to select a lift with a higher weight capacity than the one your car weighs. However, keep in mind that weight capacity is only one factor when evaluating the quality of a lift. For example, an uncertified lift may lift more weight than a certified model, but it is still not as reliable or safe.

Before you start installing your lift, read through the instruction manual carefully. It contains tips and information to help you ensure the safety of your lift. Also, be sure to post warning labels and other safety materials on the lift.


Before purchasing and installing a 2 post car lift, you need to determine where you want to install it. Some lifts do not require electrical work, while others will require you to purchase a compressor. You should also double-check the height of the vehicle once it is raised.

If you do not have a lot of space, consider using a normal-sized vehicle to test the height of the lift before making a purchase. It's also wise to leave enough room for error when measuring the height of the vehicle.

If you're installing the lift yourself, make sure to take into consideration the dimensions of your shop, the depth of your concrete slab, and other factors. Before you make a final decision, you may want to consider hiring a qualified electrician to complete the installation. The electrician will also be responsible for powering the lift.